2RELAY-12V

DESCRIPTION

             PRODUCT NAME: TWO RELAY

PRODUCT DESCRIPTION:

              The Two Relay Module is a radio frequency (RF) device capable of controlling up to 5 A of general-purpose load based on input from Pico® controls and Radio Powr Savr™ occupancy and daylight sensors. An optional, low-voltage dry contact closure output is available to communicate occupancy status to 3rd-party systems such as HVAC controllers. Communication with RF input devices, such as Pico® controls and Radio Powr Savr™ sensors, is accomplished using Lutron Clear Connect™ RF Technology.

FEATURES:

  •  Capable of switching 5 A of general-purpose loads
  • Optional low-voltage dry contact closure output provides
  • integration to building management systems, HVAC, VAV, etc.
  • Various operating voltages available.

 RELAY CONNECTIONS:

                             Normally Closed (NC), Normally Open (NO), and Common (C) relay connections are provided on terminal blocks. When the relay is not energized (digital 0) there is continuity between NC and C. When the relay is energized (digital 1) there is continuity between NO and C.

SPECIFICATIONS:

 Power Range

RMJ- models 120/ 277 V~ 50/60 Hz

RMQ- models 220-240 V~ 50/60 Hz

RMM- models 220-240 V~ 50/60 Hz

Operating Temperature

• Ambient operating temperature: 32 °F to 131 °F

(0 °C to 55 °C)

• 0% to 90% humidity, non-condensing

• For indoor use only

Load

Maximum load: 5 A general purpose. No minimum

load requirements.

• Load types include (but are not limited to):

– Incandescent

– MLV

– ELV

APPLICATION:

  • Provides Occupancy status to 3rd party equipment such as building management systems, HVAC, and          VAV controllers
  • Provides both normally open, normally closed dry contacts.

Maintained Output Type.

  • If power is interrupted, connected loads will return to the previous level prior

to interruption.