EYE BLINK SENSOR

DESCRIPTION

PRODUCT NAME: EYE GERBER        

PRODUCT DESCRIPTION:

                      The ever increasing numbers of traffic accidents all over the world are due to diminished driver’s vigilance level. Drivers with a diminished vigilance level suffer from a marked decline in their perception; recognition and vehicle control abilities & therefore pose a serious danger to their own lives and the lives of the other people. For this reason, developing systems that actively monitors the driver’s level of vigilance and alerting the driver of any insecure driving condition is essential for accident prevention. Many efforts have been reported in the literature for developing an active safety system for reducing the number of automobiles accidents due to reduced vigilance.

COMPONENT DESCRIPTION:

               This Eye Blink sensor is IR based , . The Variation Across the eye will vary as per eye blink . If the eye is closed means the output is high otherwise output is low. This to know the eye is closing or opening position. This output is give to logic circuit to indicate the alarm.
This can be used for project involves controlling accident due to unconscious through Eye blink. 

Advantages:

Component establishes interface with other drivers very easily.

  • Life of the driver can be saved by locking the ignition system of the car.
  • Traffic management can be maintained by reducing accidents and traffic jams can be avoided.
  • Using GPS & GSM exact location of the Car can be traced on MAP.

Application:

  • Automobiles.
  • Security Guard Cabins.
  • Operators at nuclear power plants where continuous monitoring is necessary.
  • Pilots of airplane.
  • Military application where high intensity monitoring of soldier is needed.

Pin

Name

Details

1

VCC

5V

2

OP

0/5 V OUT

3

G

GND